How to change is as follows.
1. After changing SCAN NAME DEF from OFF to <ON>, press IRIS OPEN KEY.
2. How to change the SCAN name is the same as “1.2 CAMERA NAME DISPLAY”.
■ PAN START POS
It sets up the initialized location of SCAN.
Controllable angle is 0~ 360° , 0 ~ -360°.
How to set up is as follows.
1. Press IRIS OPEN KEY in PAN START POS.
PAN Shift : LEFT, RIGHT KEY
2. After shifting to a desirable position, press IRIS OPEN KEY.
■ PAN END POS
It sets up the terminated location of SCAN.
Controllable angle is 0°~ 360° , 0°~-360°.
How to set up PAN END POS is the same as “PAN START POS”.
■ TILT POS
It sets up TILT angel in SCAN.
Controllable angle is 0~ 90° .
How to set up is the same as “PAN START POS” but UP, DOWN KEY should be used for TILT operation.
■ SCAN SPEED
It sets up SCAN Speed..
The speed can be set up in 5°/S(Slow) ~ 20°/S(Fast).
* Caution *
The value of Brightness, WDR, ATW is applied to the setting values on the OSD.
It is to memorize the paths operated with the joystick operation and reenact them.
Comments to this Manuals