Vision VPD370WD User Manual download pdf (Page 37)

MENU Shift : UP, DOWN, LEFT, RIGHT KEY

MENU Open : IRIS OPEN KEY

MENU Close : IRIS CLOSE KEY

■ PATT DEFINE

OFF : PATTERN is cancelled

ON : PATTERN is set up.

If operating it in AUTO RUN, PATT DEFINE should to be ON.

■ NAME

It changes PATTERN Name..

How to set up is as follows..

1. After changing PATTERN NAME DEF from OFF to <ON>, press IRIS OPEN KEY.

2. How to change the name is the same as “1.2 CAMERA NAME DISPLAY”.

■ PATT RECORD

OFF : PATTERN is not memorized.

ON : PATTERN is momorized.

How to set up PATTERN

1. After PATT RECORD changes from OFF to <ON>, press IRIS OPEN KEY.

MEMORY FILL: XXX ( Recorded )

START:IRIS OPEN

EXIT:IRIS CLOSE

PAN/TILT Shift :UP,DOWN,LEFT,RIGHT

2. Move PAN/TILT to the desirable position before starting PATTERN.

3. Press IRIS OPEN KEY to start the process

4. Press IRIS CLOSE to save the process.

* Caution *

1. If there is no PAN/TILT movement, no PATTERN is memorized.

2. The value of Brightness, WDR, ATW is applied to the setting values on the OSD.

4. ZONE SET

1.AREA SEL

1 ~ 8

2.AREA DEFINE

OFF/ON

3.AREA NEW SET

OFF/ON

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 43

No comments

Vision VPD370WD User Manual Page 37