Vision VPD370WD User Manual download pdf (Page 28)

If the sensitivity gets higher, there is a possibility to have incorrect workings.

1. Motion Detection doesn’t work in SCAN & PATTERN setting.

2. When user uses MD, DWELL TIME should be set over 3 seconds at least in TOUR setting.

3. If there is a shaken lighting directly, do not set the MD because there may be an incorrect working.

4. If there is an instant change for lights which has an effect on the subject, an incorrect working may occurs.

5. This MD function is for neither fire protection nor antitheft so that provider is free from any responsibilities of the

malfunction.

2.3. ATW

1. ATW MODE:

AUTO/MANUAL/<HOLD>/

OUT DR/IN DR

2. MANUAL RED:

0 ~ 200

3. MANUAL BLUE:

0 ~ 200

Menu Shift : UP, DOWN, LEFT, RIGHT KEY

Menu Open : IRIS OPEN KEY

Menu Close : IRIS CLOSE KEY

It is set to White Balance under any lighting conditions.

■ ATW MODE  ATW

White Balance is compensated automatically.

■ ATW MODE  < HOLD >

White Balance will be optimized under the current light condition. If the light condition is changed, White Balance

should be readjusted.

It works by pressing IRIS OPEN KEY when < HOLD > is off.

■ ATW MODE  OUT DR

White Balance will be optimized under the outdoor environment.

■ ATW MODE  IN DR

White Balance will be optimized under the indoor environment.

■ ATW MODE  MANUAL

White Balance is adjustable by RED and BLUE gains manually.

1. When it is too dark or bright on the background, White Balance may not function properly.

2. At the place the camera is directed towards the fluorescent light or lighting conditions are

changeable, White Balance may work improperly.

2.4. FOCUS/ZOOM

1 2 ... 23 24 25 26 27 28 29 30 31 32 33 ... 42 43

No comments

Vision VPD370WD User Manual Page 28