Vision VPD370WD User Manual download pdf (Page 15)

4. Affix the camera mounting base onto the ceiling.

Use screws(M4) at the locations you marked above to secure the mounting base to the ceiling.

5. Attach the safety wire for securing the camera to the mounting base.

Pull on the safety wire to make sure its ring is securely connected to the mounting base.

NOTE

The safety wire is designed to allow the camera to hang from it.

Do not apply force greater than the weight of the camera to the wire.

6. Install the camera onto the mounting base.

Aligning with the mounting base, press down on the camera as far as it will go and rotate in the direction

indicated by the arrow.

7. Use the fixing screw you removed in step 1 in order to secure the camera to the mounting base.

8. Check the installation

* Is the camera leveled and installed securely?

Screw Screws

(M4, available separately)

Safety

Wire ring

Safety Wire Ring

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 42 43

No comments

Vision VPD370WD User Manual Page 15