Vision VPD370WD User Manual download pdf (Page 24)

CAMERA INIT

AUTOSEQ INIT

PRIVACY ZONE INIT

FACTORY INIT

System INFO

This diagram shown above illustrates the overall structure of the setup menu.

In this section, a description of the setup menu features will enable users to tailor it to their personal needs.

MAIN MENU

1. PAN TILT SET

2. CAMERA SET

3. AUTOSEQ SET

4. ZONE SET

5. INITIALIZE SET

1. PAN TILT SET

1. ID DISPLAY:

<ON>/OFF

2. CAM NAME:

MAINCAMERA

3. NAME DISPLAY:

OFF/<ON>

4. FIRMWARE:

ENGLISH

5. DIGITAL FLIP:

ON/ OFF

6. FREEZE:

OFF/ON

Selection : UP, DOWN, LEFT, RIGHT KEY

Menu open : IRIS OPEN KEY

Menu close : IRIS CLOSE KEY

■ ID DISPLAY – Camera ID appears on the screen.

OFF : The ID does not appear on the screen.

<ON> : The ID appears on the screen.

When changing the location of the ID, press IRIS OPEN KEY in the condition of <ON>. Then, you can move to ID

DISPLAY Menu.

■ CAM NAME – Maximum of 10 characters can be input. When changing the camera name, press the IRIS OPEN

Key after NAME DISPLAY is set to <ON>.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 42 43

No comments

Vision VPD370WD User Manual Page 24