Vision VPD370WD User Manual

1 User’s Manual of Speed Domes VPD270, VPD330WD & VPD370WD Series

10 Camera ID setting The factory default settings of these DIP switches are ID 1 (1-ON,0-OFF) SW1~SW8 DIP SW ID DIP SW ID DIP SW ID 10000000 1

11 01100010 70 00110110 108 01001001 146 11100010 71 10110110 109 11001001 147 00010010 72 01110110 110 00101001 148 10010010 73 11110110 111 1010100

12 01101101 182 10001011 209 00110111 236 11101101 183 01001011 210 10110111 237 00011101 184 11001011 211 01110111 238 10011101 185 00101011 212 111

13 4. Installation Preparing the Camera and Decorative Cover for Side Cable Exit The camera and decorative cover should be prepared as sh

14 2. Rotate the camera base unit in the direction indicated by the arrow and remove it. Step 2 3. To install the camera mounting base to ceilin

15 4. Affix the camera mounting base onto the ceiling. Use screws(M4) at the locations you marked above to secure the mounting base to the c

16 * Is the camera free to looseness? * Does the fixed part of the camera remain in place when you try to rotate it?

17 11. In case that the cable exits on the ceiling, fix the decorative

18 * Quick and easy to install. * Neat design suitable for interior/exterior decoration Precautions * Note that you need to read carefully all conte

19 2. After removing the mounting fix screw(M3), rotate the camera mounting base clockwise to remove it. 3. Fix the camera mounting base to the ins

2 Rev. 0_August 30, 201 Table of contents 1. Features ------------------------------------------------------------

20 6. After attaching the indoor camera to the camera mounting base, turn and fix it clockwise. And tighten the mounting fix screw with screw driver

21 IP rating IP66 Fan AC24V Operating at over 40°C Heater AC24V/18W Operating at below 4°C Weight 5,500g Dimension(mm) Ø260 x 367(H) 5. Functional

22 AREA LEFT → 1~44 AREA RIGHT → 5~48 ATW ATW MODE → ATW/MANUAL/&l

23 BLC → <SET> TOUR TOUR NO →1~5

24 CAMERA INIT AUTOSEQ INIT PRIVACY ZONE INIT FACTORY INIT Sys

25 DIGITAL FLIP OFF : It operates TILT below 90°. ON : It operates TILT over 90°. FREEZE When you move to Preset, the screen displays the fr

26 2. CAMERA SET 1. BACKLIGHT----------OFF/<WDR>/USER 2. MOTION DET -----<SET> 3. ATW ----------------<SET> 4. FOCUS/ZOOM

27 2.1.2. BLC USER SETUP 1. WINDOW OFF/ON 2. LEVEL LOW/HIGH 3. WINDOW TOP 1~100 4. WINDOW BOTTOM 1~100 5. WINDOW LEFT 1~100 6. WINDOW RIGHT 1~100 A

28 If the sensitivity gets higher, there is a possibility to have incorrect workings. <Caution> 1. Motion Detection doesn’t work in SCAN &

29 1. FOUCS MODE: MANUAL/AUTO/ZMTRG 2. ZOOM TRK MODE: ON/OFF 3. ZOOM TRK SPEED: FAST/SLOW 4. DIGITAL ZOOM: OFF/ON 5. ZOOM MAG: 2X/4X/6X/8X/10X/12X

3 1. Features * Dynamic and precise AF control The camera can trace and pick up the object, moving fast from the scene with powerful 324 times(Opt

30 BRIGHTNESS : Brightness on the screen is adjustable. IRIS The brightness on the screen can be adjustable depending on the amount of light t

31 4.DURATION: FAST/SLOW 5. FILTER DELAY: 5/7/10/15/20/30/40/60SEC B/W mode with removed IR cut filter offers crystallized clear image under low ligh

32 SHARPNESS Overall sharpness on the screen is adjustable. COLOR Overall color density on the screen is adjustable. 3. AUTOSEQ SET 1. PRESET &

33 Menu Close : IRIS CLOSE KEY PRESET NO Total 128 presets can be set up. Change of PRESET NO is done by LEFT and RIGHT KEY. PRESET DEFINE OFF

34 1. When setting PRESET by the shortcut key, PRESET can be set in No.1-No.64 and, regarding over No.65, it should be set up by OSD

35 DWELL TIME It is a waiting time between PRESET execution and next PRESET. <Caution> 1. If TOUR GOURP1 PRESET is set up as follows. 1. PRES

36 How to change is as follows. 1. After changing SCAN NAME DEF from OFF to <ON>, press IRIS OPEN KEY. 2. How to change the SCAN name is the

37 MENU Shift : UP, DOWN, LEFT, RIGHT KEY MENU Open : IRIS OPEN KEY MENU Close : IRIS CLOSE KEY PATT DEFINE OFF : PATTERN is cancelled ON : PATTE

38 4.TOP/BOTTOM-1 XXX 5.TOP/BOTTOM-2 XXX 6.LEFT/RIGHT-1 XXX 7.LEFT/RIGHT-2 XXX MENU Shift : UP, DOWN, LEFT, RIGHT KEY MENU Open : IRIS OPEN KEY MEN

39 MENU Close : IRIS CLOSE KEY POWER ON RESET The unit is initialized. PAN/TILT INIT 1. PAN/TILT MENU is initialized. 2. PAN/TILT location is in

4 2. Precaution Safety Precautions * The purpose of this information is to ensure proper use of this product to prevent danger to damage to p

40 be set up by OSD Menu. ※ WTX-1200A – Simple PRESET Shift ※ It works when OSD MENU is not activated. Press F1 key shortly after pressing RRESET n

41 ※ WTX-1200A - Simple Sequency operation ※ It works when OSD MENU is not activated Press F1 key shortly after pressing Keypad No. 70. It works whe

42 Outdoor 7. Specification Model 27x/ 33x/ 37x Speed Domes Image sensor 1/4” Super HAD CCD(27x)/ Color Vertical Double Density CCD(33x, 37x) Eff

43 Gain Control Low/ Middle/ High/ Off Sens-up On/ Off(2x ~ 256x) 3D Noise Filter Low/ Middle/ High/ Off Privacy On/ Off(8 Programmable zones) Preset

5 7. Do not install the unit in humid, dirty, or sooty locations (Doing so may cause fire or electrical shock.) 8. If any unusual smell or smoke co

6 3) Part Names and Functions Body

7 Relay Output Cable RS-485 Cable Package 6 N.C 5 COM2 YELLOW 4 OUT2 BLUE 3 COM1 BLACK 2 OUT1 WHITE 1 N.C + TRX+ - TRX-

8

9 Camera cable connection DIP SWITCH SETTINGS In a configuration where the camera’s RS485 data port is used for Camera control