Vision VE-810 User Manual download pdf (Page 40)

40 VE810 Engraver Manual

Vacuum Chip Removal System

The optional vacuum chip removal system is designed to simplify the engraving process

and minimize wear and tear on the engraver. The vacuum chip removal system uses a

vacuum nose cone to remove chips created during the engraving process before they

have the chance to create problems. The quiet pump, coupled with the micro fine-layered

filters assures that your unwanted chips are whisked away effortlessly. The vacuum pump

canister uses replaceable filters that can also be reused, to assure maximum efficiency

and cost-effectiveness.

The vacuum chip removal system allows prompt removal of chips and dust created in the

engraving process, reducing contamination and overheating in the spindle area. Chip

removal also prevents the cutter from skipping over letters due to stray particles. This

vacuum chip removal system is available with or without a Vision vacuum nose cone.

(Figure 4.9) The Optional Vacuum Chip Removal System

OFF

Vacuum Pump

Vacuum Canister

Vacuum Nose Cone

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 61 62

No comments

Vision VE-810 User Manual Page 40