Vision VE-810 User Manual download pdf (Page 98)

VE810 Series 3 User Manual98

5.4 Changing the Motor Belt

Over a period of time, the VE810 motor belt will wear. When the motor belt wears, it will stretch and

cause the spindle to slip or stall. When this happens, the motor belt generally needs to be changed. The

following explains the procedure for changing the motor belt.

Cover Removal

Top Cover Screws

Remove the two top cover screws (shown below).

Back Cover Screws

Remove the five back cover screws (shown below). The center screw does not absolutely need to be

removed. It holds a cable clamp inside the back cover of the machine. To remove the center screw,

reach inside the machine with a 11/32" nut driver to hold the nut and remove the screw with a Phillips

screwdriver from the back of the machine.

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 115 116

No comments

Vision VE-810 User Manual Page 98