Vision VE-810 User Manual download pdf (Page 103)

Maintenance 103

Motor Brush Inspection and Replacement

Use a flat blade screwdriver to loosen the motor brush cap. Inspect the motor brush for length. If the

length is under 1/8 inch (3 mm), the motor brush needs to be replaced. If the motor brush is over 1/8

inch (3 mm), put the existing brush back into the motor and replace the motor brush cap.

1 2 ... 98 99 100 101 102 103 104 105 106 107 108 ... 115 116

No comments

Vision VE-810 User Manual Page 103