Vision 2448 User Manual download pdf (Page 7)

Page 7

Chapter 1:

Table Description

This chapter briey describes the major components of the Vision table. Figure 1.1 (see page 8)

and Figure 1.3 (see page 11) show pictures of two typical engraving tables. This chapter will help

you identify the parts of your Vision table discussed elsewhere in the manual.* Find the model

number as referenced in the description for each type of table design.

*Optional equipment such as accessory vises, clamps, xtures or vacuum systems may have

been included with your system. For information regarding this equipment, see the individual

instructions for these options. For descriptions of controllers, computers, and software used in

your system, see the manuals from the manufacturers of these units.

TABLE SPECIFICATIONS:

Z-Axis Clearance

(denition: the distance between the bottom of the spindle and the work surface)

Vision engraving: Adjustable Clearance

Z-Axis Stroke

(denition: the travel distance of the Z-axis mechanism or spindle)

Vision Tables: 5 Inches (125 mm)

Table Resolution

(denition: the smallest controlled motion the table is capable of)

.0002 inch on all tables (when connected to a Vision Controller)

Engraving/ Engraving Overall Table Shipping

Routing Area Dimensions Type Weight

Table

VISION 1612 16”x12” 31.5”x21”x19” T-Slot 290lbs.

VISION 1624 16”x24” 31.5”x33”x19” T-Slot 290lbs.

VISION 2424 24”x24” 33”x42”x20” Flatbed (T-slot) 386lbs.

VISION 2448 24”x48” 33”x66”x20” Flatbed (T-slot) 532lbs.

VISION 2424 RT 24”x24” 40”x42”x27.5” T-Slot 534lbs.

VISION 2448 RT 24”X48” 40”X66”X27.5” T-Slot 734lbs.

DEFINITION OF TERMS

A. Tables With Moveable T-Slot Engraving Beds (VISION 16x12 and 16x24)

In this design, the T-slot table moves in the Y-axis direction while the gantry remains xed.

The carriage moves from left to right in the X-axis. There are no particular design advantages

or disadvantages to this style of table. The main engineering criteria in the development of

this design was the need to minimize the overall table footprint while providing the maximum

engraving area.

Chapter 1

approx. packaged

L x W x H

1 2 3 4 5 6 7 8 9 10 11 12 ... 39 40

No comments

Vision 2448 User Manual Page 7