Vision 2448 User Manual download pdf (Page 21)

Page 21

Chapter 5

Chapter 5: High Frequency Router Motor

Chapter 5: High Frequency Router Motor (Part 1 of 1)

25 Pin Table Cable showing the “Female” end on the

left. This connects with the Router Table. The “Male”

end (on the right ) connects to the interface labelled

“TABLE” on the Vision 3 Serial Controller.

Spindle/4th Axis Cable showing the “Male” end. This connects

from the Router Table to the interface labelled “SPINDLE/4TH

AXIS” on the Vision 3 Serial Controller.

Spindle/4th Axis Cable showing the “Female” end. This

connects

from the Router Table to the interface beneath the High

Frequen

cy Inverter which is also mounted to the Router Table.

High Frequency Cable showing the “Female” end. This is part

of the cable that connects from the interface beneath the High

Frequency Inverter to the interface labelled “HIGH FREQ” on the

Vision 3 Serial Controller.

This is the 220

single phase A/C

plug that connects to the high voltage

elec

trical outlet. This is the other part of the cable that

connects

from

the interface beneath the High Frequency Inverter is

mounted to

the Router Table.

Vision 3 Serial Controller

Router Table

High Frequency

Inverter

Schematic Diagram showing the Cable Connections for the

High Frequency Spindle on the 2424/ 2448 Router Table

(Items shown are not to scale.)

To electrical

outlet

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 39 40

No comments

Vision 2448 User Manual Page 21