Vision VHD-800X User Manual

Digital Video Surveillance System User Manual ※ The picture & functions & supplied items might differ according to the specific

9

10 2. Operation 2.1 User Log-in Check the power connection. Input USER and PASSWORD for login after turning on the system. The factory default

11 2.2 Live Display Mode 2.2.1. Channel Selection Real-time live image can be seen by easy button operation after power-on. The images can be s

12 2.2.2. Menu(Tool) Bar When user place USB mouse pointer in the bottom of the monitor in live mode, menu(tool) bar will be appeared as below pic

13 2.2.3. Icons In real time live mode, icons or messages will be indicated on the screen to notify the system mode or status. Below are the icon

14 2.2.5. Video Loss “Video Loss” is shown on the display screen when camera is disconnected on a certain channel. If a channel doesn’t have a c

15 2.4 Search Recorded Image User can search recorded image by clicking the right mouse button and select Search button or clicking Tool button i

16 2.4.2. Calendar Search User can select date and time to search for a certain image within the recorded image. The red colored date means there

17 2.4.3. Event Search The Event search is used to find particular event, quickly and easily. In order to find a specific event, select a date/t

18 2.5 PTZ Operation User can get into PTZ mode by clicking right mouse button and selecting “PTZ” in the pop-up menu or select joystick button

19 2.7 Alarm Out User can manually activate every single relay and beep sound of the DVR. At “Alarm Out” of the pop-up menu, click the relay numb

20 2.9 Backup during Playback User can easily archive video while watching video playback. In playback mode, user can click Backup button on t

21 3. Setting General setting structure consists of “System”, “Device”, “Record”, “Network”, “Backup” and “Quick Setup” as below. Main Classific

22 3.1.1. Information DVR NAME User can designate the DVR name by using virtual keyboard as below. DVR ID User must setup DVR ID to match w

23 Time Format User can change time display format(12hours or 24hours). Language User can select language for menu. Current Version It shows the

24 1) Put USB thumb-drive which was formatted by FAT/FAT32 in any USB port of DVR that shall be compatible with USB 2.0 version 2) Once the system

25 3.1.2. User The ADMIN user (default password is 1234) has got the full authority for system setting, and can change the system password or ass

26 3.1.3. Export/Import User can copy and paste the system configuration values in this menu. “Send Setup” allows user to copy the setting val

27 3.1.4. HDD User can check model, total size, available size and status of the installed HDD. User can select “Overwrite” or “Stop” when HDD

28 3.2 Device 3.2.1. Camera User can set each camera’s name, motion area and covert function, etc.. Name In order to distinguish the channel fro

WARNING TO REDUCE FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. The installation should be made by a qualifi

29 3.2.2. Audio User can select the usage of audio input. The number of audio channel may differ depending on DVR model.

30 3.2.3. Sensor It allows user to set alarm generation when the external sensor device, connected to the DVR, detects signal. On/Off Turn on o

31 Notification User can select how to be alerted upon sensor is activated by clicking “Notification” button. The system will generate buzzer soun

32 3.2.4. Motion Alarm Motion alarm is to start the recording when motion is detected by installed camera based on the area setting. The system wi

33 3.2.5. Extra Alarm There are two extra alarm functions available on the system such as SMART & VIDEO LOSS. S.M.A.R.T It is to trigg

34 3.2.6. PTZ User can set detail for connecting PTZ camera to the DVR. Check the below items for proper P/T/Z operation.  Check if the pro

35 Note PTZ operation works properly only when the PTZ setup in the DVR is the same as that of PTZ camera. 3.3 Record 3.3.1. Camera Recor

36 3.3.2. Schedule Set recording schedule for each camera. User can set schedule for each camera, differently, or can set all cameras with the sa

37 Table for schedule is divided into three rows as WD(weekday), WE(weekend), HD(holiday). Note Emergency Recording User can record instantly w

38 3.4 Network DVR can be connected to network or internet through either fixed IP or dynamic IP by proper setting of DVR & router. 3.4.1. N

Cautions Read Before System Operation Follow these details to prevent material damage or personal injury. Signs of Caution and Warning W

39 TCP Port It is for setting value transmission. Input the port number to use when connecting locally or remotely.(Default : 9020) It is for use w

40 3.4.2. DDNS User can use either a public DDNS server or the DDNS server operated by DVR maker (cctv-link.net) to connect through dynamic IP. It

41 3.4.3. Router Setting (Port Forwarding) If user wants to use router for network connection, necessary Port Forwarding in the router (both stati

42  For Web Port of DVR If you use 80 for Web Port (mentioned as above), you have to forward Port # 80 to DVR LAN IP.

43 3.4.4. NTP NTP function can use standard internet time server and “pool.ntp.org” is recommended. In order to use this function, select the ti

44 3.4.5. Notification DVR can notify the event to registered e-mail address. Receiver Click [Receiver] to register e-mail address to receive e

45 Sender Click [Sender] to set server to send e-mail. SMTP Server Type / SMTP Server Select SMTP server. If user wants to use a specific server

46 3.5 Backup 3.5.1. Backup User can archive video clip recorded for a certain period for a selected channel or channels to USB memory stick or

47 3.5.2. Backup Video Retrieve After archiving, there would be file created as “ .exe”. Double click the file to play the backup images at t

48 3.6 Easy Setup Easy Setup is to help user make easy configuration for network, recording mode & quality. The setting made by Easy Setup wi

4 3. The air inhaler of the front panel and air outlet of the back panel must not be blocked during installation. The internal temperature of t

49 4. Q & A 1. There is nothing displayed on the monitor though electric power is supplied to DVR. 1) Please check if the power is suppl

5 Contents 1. GETTING STARTED ...

6 1. Getting Started 1.1 Checking Supplied Items Make sure that you have following items supplied with your DVR. If any of these items is missi

7 1.2 System Startup After connecting all peripheral devices, connect power cord to the DVR for system startup. Once the DVR is started, image wi

8 1.3 System Shutdown To turn off the power, click “TOOL” button and then click “SHUTDOWN” in the GUI software as below. Do not pull off the powe